
Illustrative room sceneArtificial Areca Palm Tree — Wire-Shaped Fronds, Stable to an 8° Tilt
$319 CAD — Canadian delivery quoted
An artificial Areca palm tree with a waterproof PE structure, stable even tilted up to 8 degrees, standing 5 ft tall. Fronds are wire-shaped for adjusting, set in a moss-covered pot for indoor placement.
- Height5 ft
- Foliage materialPE (polyethylene), waterproof structure
- Trunk materialNot stated; described as natural-looking
- Pot materialMoss-covered; colour and material not stated
- PlacementNot stated beyond general indoor decor
- UV ratingNot stated
Canadian Delivery by Request
This piece ships from a US warehouse. For delivery in Canada, send a request and we will confirm the delivered price and timing before you pay.
Request Canadian DeliveryA faux Areca palm, one size, built with a waterproof PE structure and a specific stability figure: it stays upright even tilted up to 8°.
Areca is the palm most people mean when they picture a generic indoor palm — feathery fronds off a clustered base, tolerant of average room light better than most palm species, though not indifferent to it. This tree's real point of interest is a specific engineering claim: it stays upright when tilted up to 8°, an unusually concrete stability figure for this category, where most listings just say "sturdy" and leave it there.
The construction backing that claim is plug-in stems and flexible wire branches — the tree assembles from separate pieces rather than arriving fully formed, and each branch can be reshaped after assembly. The structure is waterproof PE, which matters less for an indoor tree but is a real, stated material.
Specifications
| Height / Size | Not specified |
|---|---|
| Foliage material | PE (polyethylene), waterproof structure |
| Trunk | Not specified |
| Pot | Moss-covered pot |
| Stability | Stays upright tilted up to 8°. |
| UV rating | Not specified |
| Placement | General indoor decor use |
| Assembly | Plug-in stems with flexible wire branches, designed for quick setup and reshaping |
Artificial Areca palm, or a real one, for a home with pets?
| This tree | Live Areca palm | |
|---|---|---|
| Stability if knocked or tilted | Stays upright to an 8° tilt | A live potted palm tips easily unless heavily weighted or staked |
| Light required | None | Bright indirect light most of the day |
| Cost, year one | Paid once | Paid again, plus a pot |
| Pet safety around toppling | A toppled tree is a quick clean-up, no soil or roots involved | A knocked-over live palm means soil, roots and a broken pot on the floor |
| Cost, year five | Nothing further | Frequently replaced at least once |
For a home with an active dog or a climbing cat, the tilt stability is a genuine, specific reason to pick this over a live plant — most artificial trees don't make a claim this concrete, and a toppled real palm is a bigger mess than a toppled fake one.
What's in the box, and how do I set it up?
This tree assembles from plug-in stems rather than arriving as one piece, so unpacking involves fitting the stem sections together before you get to the usual step of opening out the fronds by hand. Separating palm leaflets along each frond's spine is slower than shaping a broadleaf tree's leaves, and the flexible wire branches should make the reshaping itself easier once the pieces are together.
Inspect the pot before you accept delivery, and photograph anything damaged before you unpack further. Check the plug-in stem joints specifically on this one; a loose or cracked joint is the most likely failure point on a tree built this way.
Who should not buy this?
- Direct outdoor sun. Best suited to indoor use.
- Anyone who wants a single-piece tree straight out of the box. This one assembles from plug-in stem sections.
- Buyers who want the pot colour confirmed before ordering. Only "moss-covered" is described here.
Does this palm really stay upright if it gets bumped?
It's built to stay upright even when tilted up to 8°, a specific, stated engineering claim rather than a general "sturdy" description — aimed explicitly at homes with pets or active conditions. As a stated spec it's genuinely more concrete than most competitors publish.
Can pets or kids knock this palm over safely?
This is one of the stronger arguments for this tree: it's specifically built for the 8° tilt stability for homes with pets or active conditions, a more concrete safety-adjacent claim than most artificial palms make. Treat it as meaningfully more pet-tolerant than an unweighted competitor, not as unconditionally tip-proof.
How do I assemble this palm?
It comes apart into plug-in stem sections that fit together rather than shipping as one solid piece — expect to assemble the stem sections first, then open out and shape the fronds using the wire built into each branch. Budget a few minutes for the mechanical assembly, and considerably longer to properly separate and angle every frond by hand.
Can I put this palm outside?
We'd treat this as an indoor tree, since no UV rating is specified — for spots with direct sun, choose a UV-rated product instead.
You May Also Like



Artificial Palm Tree — Single or Pair, PE Foliage on Stainless-Steel Branches
6 ft
From $169 CAD — request a quote

Artificial Palm Tree — 4 ft, Anti-Tip Base with Stainless-Steel Branches
4 ft
From $419 CAD — request a quote

Artificial Areca Palm Tree — 4 to 6 ft, 15 to 21 Leaves by Height
4 ft (122 cm) – 6 ft (183 cm)
From $289 CAD — request a quote

Artificial Areca Palm (Dypsis Lutescens) — 5.2 ft, UV-Resistant, Set of 2
5.2 ft (63 in)
From $419 CAD — request a quote
Frequently asked questions
This palm stands 5 ft tall, with plug-in stem construction and wire-shaped fronds you can bend into a natural-looking curve.
It's built to stay upright even when tilted up to 8 degrees, which is meant for households with pets or generally busier conditions. That's a specific stated figure rather than a general sturdy claim.
PE (polyethylene), described as a waterproof structure. The fronds are wire-shaped so you can bend and angle them by hand.
We don't have a published figure for that. It's described only as natural-looking in general terms, with no specific material named for it anywhere.
The tree comes apart into plug-in stem sections that fit together, with flexible wire built into the branches for shaping the fronds afterward. No exact assembly time is stated.
Delivery
Quoted to your Canadian address
Returns
Terms confirmed with your quote
Questions?
Email support@eververda.com

